Find A RSS

How to Install a Gate – Blogging Information

The process of installing a new gate for your garden can be a bit tricky. This article will demonstrate how installation companies put into new gates within older fencing.

It is first necessary to install the gate. You will also need hinges, screws and screws, as well as a latch, drills, scale, and measuring tape. As the timber expands, it retracts. Therefore, you need to ensure you have at least 20mm of variance between the width of the gate frame , and also the size of the gate itself.

Check that the posts on which the gate is being installed have been leveled vertically. Then fix the hinges to the center of the top middle and bottom pieces of wood on the gate. Line up the hinges to the gate and not the gate’s gate post attach them using the drill.

To allow the gate sufficient space, put a plank constructed of wood underneath it. You should put some screws inside each hinge when drilling them to attach the gate posts. Once you’re satisfied that the gate is properly swinging you can put the rest of the screws into.

When the latch is properly centered and the screws are in place, you can drill holes for securing the latch. To learn more you can watch the video below.


Follow by Email